Description:

9302-1.65 is two component polyurethane insulation system for the appliance and transportation industry.  Density range of 1.55-1.75# pcf 9302-1.65 contains no Class I substances regulated by the EPA.  Meets requirements for Underwriters Laboratories 94 HF-1 rating.

Proposed uses:

• Use as structural insulation in building components, truck body, commercial refrigeration and freezer panels.

• Marine flotation foam conforming to the following specifications, 33 CFR Section 183.114 Coast Guard.

• Commercial Foam in place Pipe insulation for Hot / Cold applications.

• Structural applications for foam in-place

Processing Characteristics Typical:

Mixing Ratio:   100 parts A Component to 95 parts B component + 5

A (PFPI-A 931-2113)

B (PFPI-B 9302-1.65)

Acceptable processing temperature at gun head 77 +  5 F.

PROPERTY	VALUE
String Gel @ 77 F	85 - 110 seconds
Track Free Time @ 77 F	140 - 180 seconds
Free Rise Density	1.55 - 1.75 lbs / cuft
Nominal Overall Density	2.5 (pcf) 2' X 4' X 2" Panel

Variations in output, mixer, temperatures, ratio as well as other operating parameters will affect foam processing and resulting properties.

SHELF LIFE:

Shelf life of System 9302 - 1.65,  "A" and "B" components, is six months from the date of manufacture when stored in original unopened containers at temperatures between 50 and 74 F.

NOTE:

The information data and products presented herein are based upon information reasonably available to Preferred Foam Products, Inc. at the time of publication and are presented in good faith.  PFPI warrants that only the material shall be of merchantable quality; this warranty is in lieu of all other written or unwritten, expressed or implied warranties, and PFPI expressly disclaims any warranty for particular purpose of freedom from patent infringement. Accordingly, Buyer assumes all risks whatsoever as to the use of these materials and Buyer's exclusive remedy as to any price of materials.  Failure to strictly adhere to recommended procedure shall relieve PFPI of any liability with respect to the materials or the use thereof.  You should thoroughly test any application and independently determine satisfactory performance before commercialization.

"WARNING"

These products can be used to prepare a variety of polyurethane products. Polyurethane's are organic materials and must be considered combustible.

Revised 10-2006