PREFERRED FOAM PRODUCTS INC.

Product Usage
Our Operations
New Products
Expanding Foam Display
M.S.D.S.
Product Data Sheet
Insulation Expressions
Hand Mixing
Systems Operation
Foam Gun Repair Guide
Foam Industry News
Contact Us

 

 

 

Expanding Foam Display

Below is an example of Urethane foam rising. Air temperature variations effects the time frame in which foam dries to a tack free state.

  4 seconds of urethane foam out of our foam gun (2 lb of foam)
  .20 seconds
  .40 seconds
  1 minute

String Gel
(around this point, If touched with your finger it would stick to your finger and as you pull your finger away it would look like gel string)

1 min. 20 seconds
  1 min. 40 seconds
  2 min.
  2 min. 20 seconds
  2 min. 40 seconds
Tack Free 3 minutes
  This is the end result. 4 seconds (2 lb's) of urethane foam out of our foam gun, sprayed into a box. This urethane foam example was cut out of the box for a good view.

Always put your
test on a scale.
tangun1.jpg (66850 bytes)
Urethane foam "A side" and "B side"
with our urethane foam gun.

 


This is a slide show of the above foam test

 

 

.