 9907 M.D.S.
DESCRIPTION
Two component Foam in-place Polyurethane Foam using froth dispensing
equipment.
0-ODP E-84 Class
PROCESSING PARAMETERS
| A-side (isocyanate) Component
Code |
PFPI A |
| B-Side (polyol) Component
Code |
9907B |
| Ratio by weight (A/B) |
100/101 +/- 5 |
| Nominal Free Rise Density (pcf) |
1.65# pcf |
| Nominal Reactivity (sec) |
| String Gell |
| Tack
Free |
|
|
| Component Temperature (F) |
80 F |
| Mold Temperature (F) |
100 F |
TYPICAL FOAM PROPERTIES
| Test Panel Overall Density (pcf)
24x 48 x 4 |
2.3# pcf |
| ASTM D-1621 Compressive Strength
(psi at 10% compression) |
| Parallel |
| Perpendicular |
|
|
| ASTM C-177 K-Factor,
Initial (BTU/in/hr/sq.ft./f) |
0.16 |
| ASTM E-84 U.L. Subject 723 (Basf
file #R-5692-4 Core panels) |
| Flame Spread |
| Smoke |
|
|
| ASTM D1929-91 |
| Min. Self-ignition
Temp |
| Min.
Flash-Ignition Temp |
|
|
| ASTM D-2126 % Volume Change |
| 28 Days @ -20F |
| 28 Days @ 158F |
| 28 Days @ 200F |
| 28 Days @ 100F +
100% RH |
| 28 Days @ 158F +
100% RH |
|
|
| ASTM D-2127 Water Vapor
Transmission |
3.05 perm |
Shelf
Life:
The shelf
life of System 9907 A and B components, is six months from the date
of manufacture when stored in the original unopened containers at
temperatures between 50 and 75F.
NOTE:
The information data and products presented
herein are based upon information reasonably available to Preferred Foam
Products, Inc. at the time of publication and are presented in good
faith. PFPI warrants that only the material shall be of merchantable
quality; this warranty is in lieu of all other written or unwritten,
expressed or implied warranties, and PFPI expressly disclaims any
warranty for a particular purpose or freedom from patent infringement.
Accordingly, Buyer assumes all risks whatsoever as to the use of these
materials and Buyers exclusive remedy as to any price of materials.
Failure to strictly adhere to recommended procedure shall relieve PFPI
of any liability with respect to the materials or the use thereof. You
should thoroughly test any application and independently determine
satisfactory performance before commercialization.
Warning:
Polyurethane products manufactured or produced
from these chemicals may present a serious fire hazard if improperly
used or allowed to remain exposed or unprotected. The character and
magnitude of any such hazard will depend upon a broad range of factors
which are controlled and influenced by the manufacturing or production
process, by the mode of application or product. Each person, firm or
corporation engaged in manufacture, production, application,
installation, or use of any polyurethane product should carefully
determine whether there is a potential fire hazard hazard associated
with the use or application of this product. All precautionary and/or
safety measures should be implemented.
Preferred Foam Products, Inc. Voice
860 669-3626 Fax 860 664-4919
Revised 10/31/06
|
